Stage 1 or higher ECU Tune is required to run this transmission tune.
- On sale
Integrated Engineering
Integrated Engineering IE Audi B9 AL552 ZF8 Transmission Tune (S4, S5 & SQ5)
Integrated Engineering IE Audi B9 AL552 ZF8 Transmission Tune (S4, S5 & SQ5)
Fitting service at Xatrix, West Yorkshire
We can offer a fitting service for this part. Contact us for a fitting quote.
The IE Transmission Tune for your Audi turbocharged B9 S4, S5, or SQ5 3.0T delivers increased power, higher RPM limit, faster shifts, variable launch control and additional transmission performance features. When paired with the matching ECU tune, acceleration times will greatly improve turning your tuned turbocharged engine into a fully rounded performance machine.
You will also need the Integrated Engineering IE POWERLink Cable to flash your car.
- IE guarantee -45 days risk free
- Performance matched calibration for all IE B9 3.0T tunes
- Enables launch control in drive, sport, and manual modes
- Includes user-adjustable launch control
- Lightning-fast shift speed
- Enables 6500 RPM limit in all transmission gears
- Increases torque limits
- Refined drive for the automotive enthusiast
- Reduces time for double-downshifting gears
- Line pressure increased to protect against trans slip
- Direct port OBDII at-home flashing
Performance Matched
IE's B9 3.0T ECU Tunes are fully realized performance calibrations that deliver incredible power figures. Without a matching TCU tune, the transmission can feel unmatched to the new ECU tune -leaving speed on the table. Furthermore, the TCU upgrade modifies shift speed, torque limit maps, line pressure, and launch control functions, to fully match your ECU calibration. As a result, horsepower and torque levels are raised and acceleration is greatly improved to create a complete ECU & TCU performance package.
Variable Launch Control
The IE ZF8 AL552 TCU Tune includes a variable launch control to deliver chest pounding launches from a stop. 3 different launch RPMs (street, aggressive, or race) are included to dial in the fastest launch for your vehicle and tire setup. With the optimized launch mode set in your TCU, you can launch to the moon knowing your tires will put down the maximum power needed for the fastest launch.
One Tune for All Stages
IE’s ZF8 AL552 TCU tune is all-inclusive without any unnecessary upgrades or additional charges for future ECU Tune upgrades. All features and optimizations are included for any level of hardware or performance stage, one cost and you are covered for all and any future upgrades.
Reliability testing
IE's fully proven transmission software allows the full performance experience from your supercharged 3.0T engine while retaining factory comfort and reliability. IE's own tuning technology suite is used to completely reverse-engineer the factory transmission mapping, allowing our software engineers access to realign all safety protocols for the new TCU calibration. Every tune parameter undergoes months of testing on our in-house dyno systems to verify all correct conditions for peak power delivery and reliability. All driving behavioral maps undergo thousands of miles of testing and a variety of users were polled to develop the ideal driving behavior.
Driving Enhancements
The factory transmission calibration has many performance short comings leaving much to be desired by the enthusiast driver. IE software engineers have completely reworked the transmission tune computer with performance driving in mind. This new transmission calibration keeps the engine and transmission in the proper gear throughout the power range in a sported driving scenario without any annoying gear-hunting situations.
RPM Limit Raised
The factory ECU and TCU tune has a maximum rev limit of 6500RPM, however in full throttle pulls 1st and second gear are short shifted, leaving power on the table. IE's complete TCU tune raises the transmission to a 6500RPM limit across the board for the best powerband in every gear. This extra power band will not only rev out longer, but will take full advantage of the extra top-end power on ethanol tunes sending your car down the track even faster!
Fast Downshifts
When engaging full throttle from a cruising speed, the factory TCU calibration has longer pauses when dropping multiple gears. This delay causes a large lag when you are asking for immediate power. IE's performance calibration removes these delays when dropping down multiple gears, delivering near-instant boost and power when you demand it.
IE's POWERlink Cable and Flash Wizard software gives you the freedom to quickly flash your new IE ECU or TCU Tune. Simply plug your POWERlink into the vehicle's OBD-2 port and follow the on-screen directions, it's that easy!
If you are purchasing along with an IE ECU Tune, you do not need to purchase two POWERlink cables. One cable can flash both your ECU and TCU tunes.
- AUDI B9 S4 2017-2020
- AUDI B9 S5 2018-2020
- AUDI B9 SQ5 2018-2020
Consumer Notice: This tune is currently only for B9 platforms and does not support B9.5 (facelift) transmissions. B9.5 support is coming soon!
IESOWB1
Manufactured by
Integrated Engineering (IE)
Price Match Request
We are never beaten on price. Let us know where you found a lower rate!
If approved, you will receive a customised invoice with the matched price within 24 hours.
-
Price Match Guarantee
We are committed to giving you the best price. if you find a lower price on the same item at an eligible UK retailer website, we will match it.
-
Next Day UK Delivery
For in stock items, get FREE Guaranteed next day UK delivery for orders over £199, excluding delicate items, larger items and certain remote postal codes/areas. Same day dispatch available if your order is placed before 1pm UK Time.
-
Worldwide Shipping
We ship worldwide via DHL International, simply enter your full address at checkout to see the shipping option(s) and quote(s). Same day dispatch available if your order is placed before 1pm UK Time on all in stock items!