Menu
Cart 0

Eventuri Audi RS3 8V Eventuri intake System (Gen 2)

Eventuri

  • £1,500.00
    exc. VAT £1,250.00
    £1,250.00

In Stock


AUDI 8V RS3 Gen 2 (Face lift models)

Performance Gain: 17-20hp, 22-25ft-lb
V-Box Acceleration : 60-130mph Reduced By 0.3 Seconds

The Audi 8V RS3 Eventuri intake sets a new benchmark in aftermarket intake design for this platform. It was developed to achieve two objectives – 1) De-restrict the turbo inlet path. 2) Maintain low inlet temperatures. The first objective was met by using 88mm internal diameter tubing all the way to the turbo as well as using our unique Venturi housing to maintain laminar flow. The second objective was met by designing a sealed system to the stock cold air feed therefore ensuring the turbo does not draw heated air from the engine bay. The intake duct draws air from the stock feed and has been maximised in volume to allow the highest flow rate through the filter. The resulting performance gains and aesthetics are industry leading for the 8V RS3.

  

The Eventuri Difference

The 8V RS3 Eventuri system uses our Patent Pending Carbon fibre Housings which provide an aerodynamically efficient airflow path from the filter to the turbo tubing. Not just another cone filter with a heat shield but a unique design which invokes the Venturi affect. You can read more about the housing design and how it works HERE

 

Components

The Eventuri 8V RS3 intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. Here are the details for each component and the design ethos behind them: 

Each intake system consists of:

  • Carbon Fibre Venturi Filter Housing
  • High Flow Urethane Cone Filters
  • Carbon Fibre inlet Duct
  • Carbon Fibre or Metal Turbo Tube
  • Carbon Fibre Connecting Tube
  • Laser Cut Stainless Steel Brackets
  • Silicon Couplers and Reducer

       

      Installation Guide

       

      Eventuri BMW Carbon Performance Intake System F10 M5 Installtion Guide - ML Performance UK

       

      Dyno Graph (Click to enlarge)

      Extensive testing was carried out on this system both on the Dyno and road. Firstly the dyno tests were carried out showing an impressive gain of approximately 17hp and 25ft-lb of torque. The gain is not just at the peak but throughout the RPM range. This translates on the road to increased part throttle and full throttle response with the car pulling much more eagerly to the redline. The testing was done on the same day back-to-back and temperatures were monitored to ensure consistency. The car was tested firstly with the stock intake - hood closed. We then left the car on the dyno and installed the Eventuri. The car was then run again - hood closed. Several runs were carried out with both configurations to get a consistent result. 

      Eventuri Audi 8V Eventuri intake system (RS3) ML Performance UK

       

      Compatibility Check

      To ensure the part(s) you have ordered fits your vehicle, we run a compatibility check prior to dispatch. We can do this either using your registration number(UK) or the last 7 digits of your VIN. Simply enter your car details prior to checkout. 

       

      Compatibility

      Audi 8V RS3 Face lift model only (2017/2018+)

       

      Free Next Day UK Delivery

      Free Next Day UK Delivery if ordered before 11am on all in stock items! We can also ship worldwide, simply contact us for a quote.

       

      Warranty

      One Year Eventuri Warranty

       

      Manufactured by

      Eventuri 


      We Also Recommend

      Customer Reviews

      Based on 2 reviews Write a review