This is VR Tuned ECU Flash Tune Mercedes GL63 S AMG 5.5L V8 Bi-Turbo 577HP. Manufactured by VR Tuned.
The Mercedes-Benz GL63 S featuring the 5.5L Bi-Turbo engine is a pure animal directly from the factory. However once you do the the VR Tuned ECU upgrade, the GL63 becomes a supercar killer. With our ECU calibration, you are able to gain improved performance from the engine with an increase in horsepower and torque. The biggest difference when you flash your car is the overall improvement of the power curve. Your car will have much better throttle response and the turbos will spool up faster. Where your car is sluggish off the line, your newly flashed car picks up right away and pulls harder through the mid and top end RPM range. Overall, the driving characteristics are vastly improved while providing you additional benefits that your car craves for.
Crank Horsepower Ratings:
- Stock Power: 577HP | 561ft/lbs
- Tuned Power: 660HP | 797ft/lbs
What are the benefits of VR Tuned?
-
#1 priority is our customer service to you!
- Our tuning is used worldwide. We have powered vehicles of all types.
- All ECU tunes can be reverted back to stock if necessary.
- With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU.
- Adding parts such as an exhaust, intake, plenum, pulley, will all adjust with the tune.
- If you add higher octane fuel, the ECU will adjust accordingly.
- We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
- Other custom enhancements are available if requested and applicable.
- We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want!
How to Flash Your ECU?
- Use the DimSport handheld device. You can flash between these at anytime. See Instructions Here.
- We can bench flash the ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then ship it back to you for reinstallation. We do not solder or modify the ECU board at all. All ECU tuning is done by plugging into the front connecting pins.
- Bring your vehicle to our facility where we can use our Master Cable to flash your vehicle.
For reference this ECU is a BOSCH MED17.7.3