The Porsche 992 Turbo S 3.8 Bi-Turbo is an absolute machine making 640 horsepower to the engine stock.  To improve the performance and gain absolutely blistering power, VR Tuned has partnered with M-Engineering to offer this ECU Flash for the Porsche 992 Turbo S.  With countless hours of datalogging, dyno testing, and driving, we have worked together to develop a tune that delivers 150 awhp and 160 ft/lbs of torque! The 3.8 DFI twin turbo engine has been reconfigured in the new 992 chassis to crave this kind of power increase.  Stock we see about 22-23psi of boost running it in 4th gear on our Mustang Dyno.  Tweaking boost to roughly 26-27psi, we also make adjustments to torque limiters, fueling maps, and timing maps.  This gives us a very safe, reliable, and as you see powerful ECU flash. Doing this tune absolutely turns your 992 Turbo S into a EVERYTHING killer with 0-60 now under 2.5 seconds.  We offer tuning for 91 octane, 93 octane, and 100 octane.  Check out our attached dyno sheet to see wheel horsepower numbers. 

Horsepower Ratings:

• Stock Power: 640 HP | 590 FT/LBS
• Tuned Power:
  • 91 Octane 720 HP | 664 FT/LBS
  • 93 Octane 750 HP | 710 FT/LBS
  • 100 Octane 770 HP | 725 FTLBS

What are the benefits of VR Tuned?

• #1 priority is our customer service to you!
• Our tuning is used worldwide. We have powered vehicles of all types.
• All ECU tunes can be reverted back to stock if necessary.
• With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU.
• Adding parts such as an exhaust, intake, plenum, pulley, will all adjust with the tune.
• If you add higher octane fuel, the ECU will adjust accordingly.
• We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
• Other custom enhancements are available if requested and applicable.
• We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want!

How to Flash Your ECU?

• We can bench flash the ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then ship it back to you for reinstallation. We do not solder or modify the ECU board at all. Connections are done directly to the pins on the front of ECU.

For reference this ECU is a Bosch MG1CP007

• 992 Turbo , Porsche , 2020
• 992 Turbo , Porsche , 2021

To ensure the part(s) you have ordered fits your vehicle, we run a compatibility check prior to dispatch. We can do this either using your registration number (UK) or the last 7 digits of your VIN. Simply enter your car details prior to checkout.

VRT-992-TTS-640

Manufactured by

Vivid Racing