Cloud based solution with a web based interface for use with a laptop or with our mobile apps built for iOS and Android!

Developed and tested in-house from the ground up since its debut in November 2016 with new features and updates being added regularly makes the bootmod3 platform a custom BMW factory DME tuning solution like no other on the market since.

Build the ultimate tune for your B58 engine powered vehicle and go from stock to full race calibration, and everywhere in between, with a map switch in the provided mobile app. bootmod3 calibrates the factory vehicle modules over the OBD port in a matter of minutes in the convenience of your driveway or anywhere internet access is available.

Stage 1 91 octane: up to 18% HP / 26% TQ
Stage 1 93 octane: up to 20% HP / 26% TQ
Stage 2 91 octane: up to 24% HP / 32% TQ
Stage 2 93 octane: up to 26% HP / 32% TQ
Stage 2 AGG (Aggressive burble) versions of maps available
E30 and Race gas maps are on the way!

For the additional OTS maps bundle, please see Bootmod3 BMW B58 F20 F30 G01 G30 OTS Maps Bundle (Inc. M140i, 340i, 540i & X3 M40i).

You may also wish to add the Bootmod3 OBD Agent Wifi Device and ML Performance BMW F & G Series OBDII to ENET Cable

Please Note: This Bootmod3 License code will be automatically sent via email upon your order!

bootmod3 app and cloud services offer many unique features not found in any other flash tune including and available TODAY:

• Mobile app (iOS and Android) and Web (http://www.bootmod3.net)
• One OTS map/tune included with the purchase
• Datalogging hundreds of diagnostic channels, up to 40 channels concurrently
• Datalog sharing and charting without a need to upload to 3rd party websites or apps using the mobile app or web browser
• Cloud based storage for map data and datalogs
• Reverting back to stock performance map and re-locking the DME to stock programming
• Live Dash - realtime vehicle parameter monitoring via in-app guages
• Diagnostics
• Read and clear trouble codes in all vehicle modules
• Reset learned adaptations (octane, knock, Valvetronic, etc)
• ECU power reset
• (Optional) Acquire a full OTS Map bundle to gain access to all OTS maps offered (SEE HERE)
• (Optional) Custom tuning available through tuners in the bootmod3 Tuner Directory. bootmod3 contains a full map editor so you can tune your car yourself or with your local tuner of choice as well.

Some of the OTS and possible aftermarket turbo upgrade custom map features provided by the bootmod3 platform :

• Top speed limiter removal
• Exhaust burble adjustments in app on any map (OTS and custom)
• Exhaust flap adjustments
• Cold start (cat heating on startup) removal for quieter cold start
• Cat efficiency check (CEL) removal for de-cat downpipes (for off-road use)
• Maps for upgraded turbos
• E85, race gas and meth injection tuning
• Custom Throttle mapping
• Backend Flash maps for use with piggybacks

For more info take a look at the FAQ here!

B58 engine BMW Vehicles supported (if your B58 vehicle is not listed please inquire with us):

• 2016–present F32/F33 440i
• 2016–present F30/F31/F34 340i
• 2016–present F20/F21 M140i
• 2016–present F22/F23 M240i
• 2016-present F32/F33/F36 440i
• 2017–present G30/G31 540i
• 2016–present G11 740i/Li
• 2017–present G32 640i
• 2017-present G01 X3 M40i
• 2018-present G02 X4 M40i
• 2017-present G30/G31 540i
• 2019-present G20 M340i
  
• 2017–present G32 640i
  
• 2016–present G11/G12 740i
  
• 2020-present G14/G15/G16 840i
  
• 2018-present G29 Z4 M40i

Note:

• If your car is a November 2019+ model, you may need to visit one of our partner garages to have the car bench unlocked before you can flash your ECU. Please contact us to know more.
• Cars with the latest 2019+ BMW software can also be affected and may require a bench unlock to flash over OBD.

Hardware Requirement

*** OBD ENET cable required, available separately

*** bootmod3 OBD WiFi Agent device is not required to use the bootmod3 platform. It is a convenience option that removes the need for using a laptop in the car when using bootmod3's features. If you're looking to simply load a tune on the car without much datalogging and monitoring then using your laptop is the ticket for you.

DME removal from the engine bay for unlocking OBD programming is NO LONGER REQUIRED. However, Vehicles with November 2019+ software updates MAY require DME unlock done on the bench to enable OBD flashing. If required you can visit one of our partner garages to have the car bench unlocked before you can flash your ECU. Please contact us to know more.

VEHICLE MANUFACTURER WARRANTY AND EMISSIONS DISCLAIMER

Some items used and/or installed by PRO TUNING FREAKS may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. PRO TUNING FREAKS makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty.

Bootmod3-B58