Castrol BioBar is a range of environmentally acceptable hydraulic fluids which can replace conventional mineral oils in hydraulic equipment where leakage or spillage may result in escape into the marine environment. Castrol BioBar hydraulic fluids are formulated from synthetic ester base oils which are selected to give a wide operating temperature range and long service life. Extensive testing of Castrol BioBar and hydraulic system components (in particular, elastomer seals) has confirmed good compatibility with standard components, which can allow conversion of existing equipment without the need for major changes. Castrol BioBar hydraulic fluids have been tested and registered according to OSPAR (Oslo and Paris Convention for the Protection of the Marine Environment of the North-East Atlantic) requirements and therefore meet the definition of an Environmentally Acceptable Lubricant (EAL) under the US Vessel General Permit for Discharges Incidental to the Normal Operation of Vessels (VGP) 2013.

Benefit

• Reduced environmental impact when compared to conventional lubricants – demonstrable benefits in the following key environmental performance criteria:
• Superior biodegradation
• Significantly reduced bioaccumulation and toxicity
• Enhanced renewability
• High levels of protection given to pump and motor components, which can contribute to a high level of reliability:
• Minimal wear of ring and vane in Vickers PM 104C pump test
• Minimal wear of ring and vane in Eaton-Vickers 35VQ25 pump test
• Castrol BioBar hydraulic fluids have been tested and registered according to OSPAR (Oslo and Paris Convention for the Protection of the Marine Environment of the North-East Atlantic) requirements and therefore meet the definition of an Environmentally Acceptable Lubricant (EAL) under the US Vessel General Permit for Discharges Incidental to the Normal Operation of Vessels (VGP) 2013.
• () Using OSPAR criteria for assessing bioaccumulation potential.

Specification

Feel free to contact us at info@mlperformance.co.uk if you require any assistance!

20ltr of BioBar 46

Please compare with your original manufacturer's oil specification which can be found in your vehicle manual. Feel free to contact us at info@mlperformance.co.uk if you require any assistance!

To ensure the part(s) you have ordered fits your vehicle, we run a compatibility check prior to dispatch. We can do this either using your registration number (UK) or the last 7 digits of your VIN. Simply enter your car details prior to checkout.

14E526

• Product Data
• Safety Data Sheet

Manufactured by

Castrol