STEP 1
If necessary, use a clay bar to remove contaminants from your car’s paint surface.
STEP 2
Push the Grit Guard snugly into the bucket.
STEP 3
Add 3 ounces of M.A.X Power car wash detergent.
STEP 4
Using a powerful stream of water, fill the bucket until foam reaches the top.
STEP 5
Starting with the roof and working your way down, spray your car with water to rinse loose dirt away.
STEP 6
Working from top to bottom, scrub exterior surfaces with the wash mitt and M.A.X. Power Car Wash solution. Dunk frequently into the bucket to release dirt and soak up more cleaning solution.
STEP 7
After the entire car is clean, rinse thoroughly from the top down.
STEP 8
Towel dry.
STEP 9
Shake the ceramic spray coating container and spray two mists onto a 2’ x 2’ section of your car.
STEP 10
Using a microfiber towel, wipe the spray coating evenly across the finish.
STEP 11
Flip the cloth to a clean, dry side and buff to a mirror-like shine.
STEP 12
Move to the next 2’ x 2’ panel and repeat the process, working one section at a time around the car.
STEP 13
For maximum protection and an even higher shine, allow Ceramic Spray Coating to cure for 24 hours and apply a second coating to your car by repeating steps 2-6.