This is AST Suspension ASTLS-14-2443 Volkswagen Lowering Springs.

• Not suitable for 16V/20V/24V and RSI models.
• Not suitable for cars equiped with standard sportsuspensions.
• Set only contains two rear springs.
• These lowering springs can only be used with shortened shock absorbers.
• Not suitable for cars with level adjustement.
• Not suitable for 4WD (four-wheel drive) cars.
• For models up to 8/79, the original springs holders (Art.No.861412113B) must be used on the front axle.
• For models up to 8/79, the original springs holders (Art.No.171412341A) must be used on the front axle.
• For cars from 10/93, it may be necessary, due to different spring holder sizes on the front axle, to use the original spring holder (Art.No.1HO-412-341).
• For 16V + VR6 and TDI, we recommend to change to sportshock absorbers.
• Lowering only suitable at the front axle.
• Installation must be done by professionals due to the extreme lowering of this setmodification may be neccesary.
• The indicated lowering can differ up to 25mm due to different models and options.
• Not suitable for VR-6 models with Air Conditioning.
• Standard lowering has already been considered.
• Not suitable for cars with Automatic Transmission.
• Not suitable for G40 models.
• For cars with standard lowering, the indicated lowering will be reduced with the amount of the standard lowering.
• We recommend to use shortend shock absorbers for this set.
• The front bumpstop must be shortend 15 mm from topside.
• TUV only suitable with normal original bumpstop or sport original bumpstop. Do not shorten the bumpstops!! With the sport bumpstop the lowering will be a little more and also the driving will be better.
• This partnumber is not GOCA (TUV) approved for Belgium.
• Not suitable for cars with multilink rear suspension
• Not for California
• Only suitable for vehicles with multilink rear suspension.
• About 15mm less lowering for vehicles with sportsuspension.
• Only suitable for vehicles with torsion-beam axle
• Not suitable for vehicles with torsion-beam axle
• Only for European Version
• The indicated lowering can differ due to different variants and options
• We recommend to shorten the rear bump stop 30mm from the bottom for better comfort
• The rear consists of an adjustable flip kit for the leaf springs, consisting of metal plates.
• We recommend to shorten the rear bump stop 30mm from the bottom for better comfort

To ensure the part(s) you have ordered fits your need, we run a compatibility check prior to dispatch. Feel free to contact us if you require any assistance!

AST-ASTLS-14-2443

Manufactured by

AST Suspension

&nbsp