Bilstein’s entry-level coilover solution, the BILSTEIN B14 brings technology from the race track onto the street. The BILSTEIN B14 is a threaded ride height adjustable kit, allowing you to fine-tune your ride height to perfectly suit your needs.

The BILSTEIN B14 coilover is a ride height-only adjustable coilover, making it the most cost effective entry into the world of adjustable suspension. The BILSTEIN B14 coilover features a threaded body with an adjustable range of 20mm at both axles while installed and with round threads, the ride height adjustment process is easy as can be. Once installed, the BILSTEIN B14 coilover offers a lowering range of approximately 30-50 mm from the factory ride height at both the front and the rear.

Bilstein has developed the BILSTEIN B14 coilover to handle the abuse that cars driven hard on the track have to endure. Quality sport springs made from highly durable material, spring plates and lock nuts made from a special aluminium alloy as well as surface coating using Triple-C-Technology® for long-lasting corrosion resistance all ensure that the BILSTEIN B14 coilover is more than capable of enduring the high pressures of hard driving.

Note: Coilover height adjustable units are supplied front & rear where possible. Where rear suspension design does not allow for coilovers, alternative height adjustable or lowered units are supplied.

On vehicles where sports suspension is an option, lowering amounts shown are for vehicles without sports suspension. If factory sports suspension is fitted, the factory lowering amount will have to be deducted from the lowering amount shown. This can be as much as 30mm (e.g. Audi S-Line, BMW M-Sport, AMG-Line etc.)

• Road-tested by BILSTEIN under motor sports conditions and fine-tuned
  
• Spring plates and lock nuts made from a special aluminium alloy
• Surface coating using Triple-C-Technology® for long-lasting corrosion resistance
• Round threads for ease of adjustment
• Quality sport springs made from highly durable material
• BILSTEIN gas pressure technology
• BILSTEIN mono-tube/Upside-Down technology, made in Germany
• German TÜV certificate

Specifications

• Lowering ca. [mm]: 30-50 mm
• Axle load [kg] to 860 kg to 1030 kg

• MAZDA RX 8 (SE17) 1.3 (10/03-06/12) 141 kW
• MAZDA RX 8 (SE17) 1.3 (10/03-06/12) 170 kW
• MAZDA RX 8 (SE17) 1.3 (11/03-06/12) 158 kW
• MAZDA RX 8 (SE17) 1.3 (11/03-06/12) 177 kW

To ensure the part(s) you have ordered fits your vehicle, we run a compatibility check prior to dispatch. We can do this either using your registration number(UK) or the last 7 digits of your VIN. Simply enter your car details prior to checkout.

47-110267

Manufactured by

ML Performance