Cloud based solution with a web based interface for use on macOS, Windows and mobile apps for iOS and Android.

Developed and tested in-house from the ground up over the course of almost 2 years prior to its November 2016 debut with new features and updates being added regularly makes the bootmod3 platform a custom BMW factory DME tuning solution like no other on the market today.

Build the ultimate tune for your S58 powered vehicle and go from stock to full race calibration, and everywhere in between, with a map switch in the provided mobile app. bootmod3 calibrates the factory vehicle modules over the OBD port in just 3 minutes, switching among maps in seconds, in the convenience of your driveway or anywhere internet access is available. After initial activation, flashing and datalogging in offline mode without internet connectivity is also available.

For the additional OTS maps bundle, please see Bootmod3 BMW S58 F97 F98 G80 G82 OTS Maps Bundle (M3, M4, X3M & X4M).

You may also wish to add the Bootmod3 OBD Agent Wifi Device and ML Performance BMW F & G Series OBDII to ENET Cable

Please Note: This Bootmod3 License code will be automatically sent via email upon your order!

bootmod3 app and cloud services offer many unique features not found in any other flash tune including and currently available:

• Mobile apps iOS and Android and Web (http://www.bootmod3.net) including Windows and macOS support
• One OTS map/tune included with the purchase and any other maps labeled as "FREE". To gain flash access for all OTS maps for your car get the OTS Maps Bundle, a one time purchase for all maps.
• Integrated Advanced Tuning Solution for building custom maps. Work with a professional tuner of your choice through bootmod3 cloud or even on your own if so inclined
• Datalogging hundreds of diagnostic channels, up to 40 channels concurrently
• Datalog sharing and charting without a need to upload to 3rd party websites or apps using the mobile app or web browser

• Cloud based storage for map data and datalogs and use at any time on any laptop or device with ease
• Only solution on the market that tunes using your actual vehicle's software instead of a cookie cutter approach other tuning companies use flashing every car with the same software.
• Flash back to your true stock map and re-lock the DME back to stock programming for service visits
• Live Dash Gauges - realtime vehicle parameter monitoring via in-app gauges
• Set up gauges with thresholds and monitors for peak values
• Peak value recall on gauges
• Adjustable gauge layout and color themes
• Diagnostics
• Read and clear trouble codes in all vehicle modules
• Reset learned adaptations (octane, knock, transmission, Valvetronic, etc)
• Reset all ECUs in the vehicle

Power gains with OTS maps based on X3M/X4M non-comp model:

• Stage 1 ACN91 octane: 11%HP / 25% TQ
• Stage 1 91 octane (95 RON): 17% HP / 28% TQ
• Stage 1 93 octane: 21% HP / 31% TQ
• Stage 1 E30 octane: 31% HP / 41% TQ
• Stage 2 ACN91 octane: 13%HP / 28% TQ
• Stage 2 91 octane: 20% HP / 30% TQ
• Stage 2 93 octane: 23% HP / 34% TQ
• Stage 2 E30 octane: 33% HP / 44% TQ
• Stage 2 Race Gas: 33% HP / 44% TQ

** ACN91 maps are for vehicles that fill up with 91 octane that in some places around the Globe can be of questionable quality and not up to 91 (95 RON) standards. Lower than 95 RON (US 91 octane) cannot be used.

Map Features

• Map Customization through Integrated Advanced Map Editor
  
• Customize various map options with dropdowns/toggles/sliders through the Map Configuration screen
  
• Exhaust burble fully end user customizable from OFF to very aggressive mode and anywhere in-between, switchable with the steering wheel controls in efficient vs. sport mode
  
• Boost By Gear end user configuration per map
• Top speed (VMAX) limiter removal
  
• Cold start cat heating cycle (loud cold start)
  
• Catalytic converter efficiency check configurable (ON/OFF) for high flow downpipes (off-road use)
• Re-calibrated Sport Gauges on iDrive
• E85/blend, race gas and meth injection tuning

• BMW G01 (F97) X3M 2019 - Present
• BMW G02 (F98) X4M 2019 - Present
• G80 M3 2021 - Present (Femto unlock required)
  
• G82 M4 2021 - Present (Femto unlock required)

Note:

• If your car is a March 2019+ model, you may need to visit one of our partner garages to have the car bench unlocked before you can flash your ECU. Please contact us to know more.
• Cars with the latest 2019+ BMW software can also be affected and may require a bench unlock to flash over OBD.
  

Hardware Requirement

*** OBD ENET cable required, available separately

*** bootmod3 OBD WiFi Agent device is not required to use the bootmod3 platform. It is a convenience option that removes the need for using a laptop in the car when using bootmod3's features. If you're looking to simply load a tune on the car without much datalogging and monitoring then using your laptop is the ticket for you.

S58, 93 octane, Bootmod3 Stage 1, Dyno

For more info take a look at the FAQ here!

DME removal from the engine bay for unlocking OBD programming is NO LONGER REQUIRED. However, Vehicles with November 2019+ software updates MAY require DME unlock done on the bench to enable OBD flashing. If required you can visit one of our partner garages to have the car bench unlocked before you can flash your ECU. Please contact us to know more.

VEHICLE MANUFACTURER WARRANTY AND EMISSIONS DISCLAIMER

Some items used and/or installed by PRO TUNING FREAKS may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. PRO TUNING FREAKS makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty.

Bootmod3-S58