We pride ourselves on delivering the best quality parts possible for your automotive projects. Our range of gaskets is a testament to the quality we promise. With precise fitment and the best available materials used, you will not be let down.

Your turbo gasket's job is to seal the mating flanges between your turbo and manifold, ensuring you don't get any exhaust leaks. Without this, you would experience terrible exhaust leaks and lousy performance from your engine. An exhaust leak is not only a nuisance for performance benefits but can also lead to an MOT failure, as those escaping gasses can leak into the cabin and harm your health.

Our gaskets are precisely cut and pressed, giving them OEM level of fitment; this will ensure you have a trouble-free installation and a proper seal.

Our Exoracing gaskets are constructed from premium-quality 304 stainless steel, offering the perfect level of formability when they are pressed. By manufacturing our pressed gaskets from 304 stainless steel, we can be sure they are highly resistant to corrosion which will leave you with a gasket that stand the test of time.

When replacing your turbo gasket, we recommend taking the time to ensure both mating flanges are free from warpage and defects, as this is the only way to truly guarantee a leak-free seal.

• 1 x Exoracing T4 Twinscroll Turbo Gasket
• 1 x Exoracing Lifetime Warranty

• Crafted from premium-quality 304 stainless steel.
• It will fit T4 Twinscroll turbos and manifolds.
• Lightweight construction of just 23g!
• Eradicates exhaust leaks from mating flanges.
• OEM level of fitment.
• Exoracing Lifetime Warranty.

Here is our step-by-step guide to help you correctly install your turbo gasket. If you need more confidence in your ability, we always recommend getting a professional to install your parts.

1. Switch off your engine and be sure it has cooled down if it has been driven recently; you want to avoid touching the exhaust components while still hot.
2. Remove all oil/water lines attached to your turbo; be sure to have something to catch any excess fluids that could leak out.
3. Remove any bolts that hold your turbo to your downpipe.
4. Undo and remove the bolts between your turbo and manifold, allowing you to remove your turbo from your car.
5. You now need to check the condition of the mating surfaces between your turbo and manifold, if there is any warpage or defects, you need to get them resurfaced flat.
6. With your new turbo to manifold gasket, you can refit your turbo to the manifold and reattach your downpipe to the turbo.
7. Ensure all bolts are tightened to the manufacturer's specs using a calibrated torque wrench.
8. Refit any oil and water lines removed from your turbo.
9. Now you have fitted your new turbo to manifold gasket, run your engine through a few heat cycles.
10. When your engine has finally cooled down, we recommend retorquing all hardware that was removed during this installation.
11. Remember to take photos and tag us in them on your social media pages @exoracinguk

• Professional installation is always recommended.
• Mating flanges must be clean and free from warpages before fitting to ensure a leak-free seal.
• We recommend using a new gasket each time you remove your turbo.

Feel free to contact us at info@mlperformance.co.uk should you wish to double check!

To ensure the part(s) you have ordered fits your vehicle, we run a compatibility check prior to dispatch. We can do this either using your registration number (UK) or the last 7 digits of your VIN. Simply enter your car details prior to checkout.

EXORACING-EX-TURB-T4-TW

Manufactured by

Exoracing