As many of you know the B58 motor is very picky about how much ethanol you run to achieve peak performance but not run lean. Consequently, we have put together a kit enabling you to easily install an ethanol sensor with no permanent modifications needed. You will simply remove disconnect your fuel line where it enters the engine bay and plug in our kit. It's a complete plug and play solution that utilizes out Bluetooth app to monitor your ethanol content. When you are ready to return to stock, you will simply remove the kit and re-attach the stock connections.

There are three options to read your ethanol content when using our ethanol analyzers:

• Bluetooth only
• Bluetooth and JB4 integrated (0-5 Volt)
• Bluetooth and 50-150hz Raw Signal
• Bluetooth (iphone or Android app must be purchased to use this feature)
• If you are using an Apple product the app can be found by clicking here
• If you are using an Android product the app can be found by clicking here  

*Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

*NOTE:  To simplify the installation of the kit, the Bluetooth ethanol analyzer does not include any other integration for JB4 as it's not needed at this time.  In doing this all plumbing connections and electrical connections can be made under the car.  If you prefer our traditional analyzer with the 0-5 volt output as well as Bluetooth, those connections will need to be made in the engine bay and you must request our traditional analyzer that will be included at no additional charge.

• Two E85 compatible -6an fuel lines
• Custom anodized billet fittings
• Ethanol Sensor
• Bluetooth Analyzer
• Accessories pack

BMW

To ensure the part(s) you have ordered fits your vehicle, we run a compatibility check prior to dispatch. We can do this either using your registration number(UK) or the last 7 digits of your VIN. Simply enter your car details prior to checkout.