Use the form below to send us your comments. We read all feedback carefully, aiming to serve you better.
If you provide your email address, you agree that we may contact you to better understand the comments you have submitted.
Unlock bigger discounts with ML Platinum. See benefits.
Before you can continue, you must agree to all of the following terms:
The RM Series is comprised of a damper cartridge secured within a threaded outer body. This specific design requires a lubricating grease to be applied during the assembly process between the two damper and threaded body to avoid metal-to-metal contact. In order to keep the two components from touching each other and generating noise transmission you will need to periodically clean out the old grease and apply new grease.
This is a simple process that can be done with just a few common tools. It does not require you to open the internals of the dampers themselves and therefore you do not need to have the dampers re-pressurized after carrying out this procedure. Please contact us on info@mlperformance.co.uk for more information and a step-by-step guide on how to complete this maintenance.
As a result of this required maintenance, we do not recommend the RM Series for road use over the BR Series or ER Series.
Upgrading to IE Midpipes on your Audi B9/B9.5 S4 or S5 is an easy and fast way to add an aggressive exhaust note. Superior engineering and quality craftsmanship will ensure a long-lasting upgrade for your 3.0T that delivers fun, and addicting exhaust sounds daily.
IE midpipes for B9 S4 & S5 deliver aggressive sound, quality finish, reliable operation, straightforward install, and affordable fun.
Engineered for enhanced engine sound
High-flow design deletes resonators
TIG-welded 304 stainless steel
Reliable OEM-quality flex sections
Leak-free exhaust clamps
Integrated rear stud for easier install
Reinforced mounting brackets for long-life
Easy to install with minimal tools
Full kit includes all hardware and clamps
Bolt-in install, no cutting or welding required
63.5mm OD / 60.25mm ID
What are Midpipes?
Located between the downpipe outlets and center resonator, midpipes make up roughly 12 feet of factory tubing and two large resonators. Upgrading this section removes the resonators and ultimately frees up the middle of the exhaust system improving flow and exhaust notes.
This helpful diagram splits the factory exhaust into sections as an example to simplify the system.
Quality Construction
IE midpipes are manufactured from high-quality 304 stainless steel tubing. This material is premium for exhaust systems and provides lighter weight and superior corrosion resistance. Enjoy the trouble-free and long-life operation of your exhaust system upgrade.
Perfect Fit
This perfectly crafted exhaust upgrade exceeds even the factory fit. IE engineers take extra steps with advanced 3D scanning technology and rapid prototyping to design these exhaust parts with exacting alignments without any interference or rubbing.
Reliable Flex Section
It's all in the details. Typical aftermarket flex sections found on many cheaper exhaust parts are the primary failure point, causing annoying leaks and performance issues. Our OE quality TIG-welded and liner reinforced flex sections are incredibly resilient to splitting or cracking for complete reliability.
Midpipe Sound Results
The S4 & S5 3.0T engine is an absolute powerhouse capable of delivering tons of power and driver enjoyment; unfortunately, the factory exhaust is full of resonators and mufflers to silence the fun. IE's midpipes are an affordable solution that modifies the stock exhaust system by removing factory resonators and replacing them with high-quality straight pipes resulting in a much-improved exhaust note.
Dial In Your Exhaust
With IE's Midpipes and downpipe upgrades, you can replace individual sections or variations of the exhaust to dial the volume to your preference.
STOCK
MIDPIPES ONLY
DOWNPIPE ONLY
MIDPIPES + DOWNPIPE
BORING
SPORTY
SPORTY
AGGRESSIVE
Downpipe Upgrade
Adding IE midpipes to your stock exhaust system is perfect for daily drivers looking for a noticeably increased exhaust note without attracting too much attention. Combine your IE Midpipes with an IE Downpipe upgrade for a more aggressive motorsport sound, and let that turbocharged V6 scream!
IE Downpipe requires Stage 2 ECU tuning. No changes in tuning are required for mipipes only.
3D model of IE midpipes and downpipe upgrades combined
Install your IE midpipes without any permanent modifications or installation hassles. The installation process is straightforward and accomplished with standard hand tools.
Install time around 2 hours
AUDI S4 2017+ (B9/B9.5) 3.0T (Turbocharged)
AUDI S5 2017+ (B9/B9/5) 3.0T (Turbocharged)
IEEXCK4
Manufactured by
Integrated Engineering (IE)
Price Match Request
We are never beaten on price. Let us know where you found a lower rate!
If approved, you will receive a customised invoice with the matched price within 24 hours.
We are committed to giving you the best price. if you find a lower price on the same item at an eligible UK retailer website, we will match it.
Next Day UK Delivery
For in-stock item, get guaranteed next day UK delivery. Same day dispatch available on in-stock items if your order is placed before 1pm UK Time.
Worldwide Shipping
We ship worldwide via DHL International, simply enter your full address at checkout to see the shipping option(s) and quote(s). Same day dispatch available if your order is placed before 1pm UK Time on all in stock items!
Choosing a selection results in a full page refresh.
