Your Audi S6 or S7 may look like a sporty high-end saloon, but hiding under it's somewhat unassuming exterior is a supercar powerplant capable of massive power. Your twin-turbocharged 4.0L eight-cylinder engine is waiting for you to unleash it's mind-blowing potential, what are you waiting for?

The Integrated Engineering IE POWERlink Flash Cable | Direct-Port ECU Tune Tool is required to install the tune.

The Integrated Engineering IE Audi C7 C7.5 4.0T EA824 DL501 DSG Tune (S6 & S7) is also required for Stage 1.

Required Hardware

• DSG Tune
• Air Intake
• Intercooler
• Catback Exhaust

Please Note: Downpipes are not compatible with Stage 1

• IE guarantee -45 days risk free
  
• Horsepower & torque gains maximized
  
• Stock boost control optimized for all conditions
  
• 91, 93, & E85 octanes available (95, 98, RON & E85)
  
• ECU safely adapts between E65-E85 Ethanol
  
• Optional Exhaust Crackle feature
  
• Optional Ghost Cam feature
  
• Rev limiter increased to 6800 RPM with DSG flash
  
• Launch control torque increased for faster launches
  
• Road speed limiters removed
  
• Annoying cylinder deactivation deleted (Will keep activated by by request)
  
• Engineered for all climates and elevations
  
• Direct port OBDII at-home flashing
  
• Easy octane switching takes only minutes
  
• Upgrade stages to match hardware upgrades
  
• Simple on/off feature toggling
  
• Read and clear diagnostic/problem codes
  
• Easy to use Data-logger

• AUDI S6 C7 - C7.5 (2012-2018)
• AUDI S7 C7 - C7.5 (2012-2018)

Maximized Output

IE ECU calibrations are dedicated to perfecting every section of the mapping to deliver a fully realized performance file right out of the gate. Maximized for full performance potential on the drag strip and road course while maintaining full comfort and reliability on your daily commute. Get ready to experience IE's Performance Software For your Audi EA824 4.0T V8 engine in only minutes from the comfort of your home garage or driveway.

Power Results

• Stock Audi advertised numbers: 420 HP, 406 FT-LBS
• Stock IE dyno numbers: 455 HP, 456 FT-LBS
• Stage 1 91 AKI / 95 RON: 575 HP, 621 FT-LBS
• Stage 1 93 AKI / 98 RON: 602 HP, 646 FT-LBS
• Stage 1 E85: 652 HP, 760 FT-LBS

Dyno Charts

S6/S7 Stage 1 E65-E85

• IE HORSEPOWER: 652 BHP
• IE TORQUE: 760 BTQ
• STOCK HORSEPOWER: 455 BHP
• STOCK TORQUE: 456 BTQ

• IE HORSEPOWER: 257 BHP
• IE TORQUE: 339 BTQ

S6/S7 Stage 1 93 Octane

• IE HORSEPOWER: 602 BHP
• IE TORQUE: 646 BTQ
• STOCK HORSEPOWER: 455 BHP
• STOCK TORQUE: 456 BTQ

• IE HORSEPOWER: 192 BHP
• IE TORQUE: 214 BTQ

S6/S7 Stage 1 91 Octane

• IE HORSEPOWER: 575 BHP
• IE TORQUE: 621 BTQ
• STOCK HORSEPOWER: 455 BHP
• STOCK TORQUE: 456 BTQ

• IE HORSEPOWER: 164 BHP
• IE TORQUE: 190 BTQ

E85 Ethanol

E85 fuel unlocks the most performance potential from our ECU tunes for your Audi S6 or S7. Ethanol contains tons of oxygen, burns cooler, and has a high resistance to knock. This provides more horsepower and torque than running conventional gasoline and is more readily available (in most states) and less expensive than race gas. E85 is an optional fuel map included with all tune purchases.

Cylinder Deactivation

The factory ECU calibration includes many compromises removed by your IE Tune. One of the most problematic is the stock cylinder deactivation which attempts to increase fuel economy by only running 4 cylinders when cruising. This causes rough shift, loss of power, and is believed to cause early failures of motor mounts. Cylinder deactivation is completely turned off by default. If you want to keep cylinder deactivation, we will reactivate on request.

E65-E85 Adaptable

Although full E85 is recommended for the highest power output, safeguards are included within the E85 ECU calibrations to adjust for ethanol as low as E65. This flexibility gives you the confidence to safely fill up at the pump which can commonly test lower than advertised.

Reliability Testing

IE's fully proven software brings track-ready ECU programming to your turbocharged V8 engine while retaining factory comfort and reliability. IE's own tuning technology suite is used to completely reverse-engineer the factory ECU mapping, allowing our software engineers access to realign all safety protocols and sensors for the new performance calibration. Every tune parameter undergoes months of testing on our in-house dyno systems that utilize the world's only Sea Level Generator developed specifically to verify tune operations in any condition. Confidently drive from LA to Pikes Peak with power that will keep you smiling every mile!

Let Your V8 Roar!

Your Audi S6 or S7 has a powerful twin-turbo V8, it's time to sounds like one too! To help accomplish this, your IE Tune includes two optional features on all stages that will make your eight cylinder turbo sound like the king of the streets. Add the motorsport-inspired Exhaust Crackle to your exhaust note or the iconic lopey idle with Ghost Cam. These addicting features exist purely to add more fun and excitement to your drive and can be turned on or off at will with your IE POWERlink.

Exhaust Crackle & Ghost Cam features are available on stock hardware, but exhaust modifications are highly recommended for the loudest results.

GHOST CAM - The optional Ghost Cam feature uses the 4.0T's variable valve timing to produce a race ready and lopey V8 idle. This cam-idle is active during idle only and will return to normal function during driving.

EXHAUST CRACKLE - Enabling the Exhaust Crackle feature will add a motorsport-inspired crackle sound to your exhaust note when you free-rev the engine or decelerate.

IE's POWERlink Cable and Flash Wizard software gives you the freedom to quickly flash your new IE ECU Tune. Simply plug your POWERlink into the vehicle's OBD-2 port and follow the on-screen directions, it's that easy!

IESOVR11

Manufactured by

Integrated Engineering (IE)

Five-star Support

IE's number one goal from purchase to installation is to provide you with the best customer experience in the industry. We want what you want; a simple purchase process, products that exceed expectations, and a brand that's got your back. If at any point you have any questions, need help, or require support with your new tune our educated customer support team and tuning specialists are standing by and happy to help. Purchasing an IE tune not only guarantees a quality product, but that you will always have us in your corner.

Live Fast, Buy Fun

Consumer Notice

By purchasing a motorsport/racing product ("product"), you represent that you understand and agree that: the product is not designed to meet any applicable emissions standards, whether in the USA or otherwise, the product is not C.A.R.B. compliant, and that the product is not for sale or use in California, USA nor any other jurisdiction where the sale or use is prohibited by law. Integrated Engineering, LLC makes no representations, warranties, or claims that this product complies with any applicable emissions laws and expressly disclaims any and all such representations, warranties, and claims, whether express or implied. By purchasing this product, you represent, warrant, and agree that it is your responsibility to inform yourself of any laws or regulations that may apply to your purchase and/or use of the product.