Features and Benefits
Features
|
Advantages and Potential Benefits
|
Active cleaning agents
|
Helps to prevent the buildup of harmful deposits to enable long and clean engine life**
Provides outstanding engine cleanliness and sludge control
|
|
**Compared to vehicle manufacturer standard
|
Outstanding thermal and oxidation stability
|
Helps to reduce oil aging allowing extended drain interval protection
|
Enhanced frictional properties
|
Provides up to 4% fuel economy improvement when changing from a higher viscosity 5W-30 engine oil***
|
|
***Actual savings are dependent upon vehicle and engine type, outside temperature and barometric pressure, driving conditions and your current engine oil viscosity.
|
Excellent low temperature capabilities
|
Quick cold weather performance to help provide fast protection at start-up
|
Outstanding high temperature capabilities
Wear protection
|
Provided outstanding high temperature protection over the entire oil drain interval**
|
|
**Compared to vehicle manufacturer standard
|
Wear protection
|
Provides outstanding wear protection over the full oil drain interval**
|
|
**Compared to vehicle manufacturer standard
|
Specification and Approvals
This product has the following approvals:
|
GM dexosD Licensed
|
MB-Approval 229.71
|
Porsche C20
|
VW 508 00
|
VW 509 00
|
This product meets or exceeds the requirements of:
|
API SL
|
ACEA C5
|
API SN Engine Test Requirements
|
API SN PLUS ENGINE TEST REQUIREMENTS
|
API SP ENGINE TEST REQUIREMENTS
|
Specification and Approvals
Property
|
|
Grade
|
SAE 0W-20
|
Ash, Sulfated, mass%, ASTM D874
|
0.8
|
Density @ 15.6 C, g/cm3, ASTM D4052
|
0.843
|
Flash Point, Cleveland Open Cup, °C, ASTM D92
|
235
|
Hi-Temp Hi-Shear Viscosity @ 150 C, mPa.s, ASTM D4683
|
2.6
|
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445
|
7.8
|
Pour Point, °C, ASTM D97
|
-51
|
Viscosity Index, ASTM D2270
|
175
|
Applications
Mobil 1 ESP x2 0W-20 is recommended for the new high-performance gasoline and diesel engines found in emerging European vehicles that require SAE 0W-20 viscosity grades.
Mobil 1 ESP x2 0W-20 can only be used in the vehicles for which it is approved. It is not backward compatible with older vehicle engines.
Mobil 1 ESP x2 0W-20 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
**** Always consult the owner's manual of the vehicle for the manufacturer's recommended viscosity grade and specifications