Product Description

Looking to make your MK7 GTi, Golf R, Jetta, etc, faster in the 1/4 mile or 1/2 mile racing? Want to run 15" wheels, and slicks in the front? Want to drop 55 lbs of weight off the front of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT Ultimake Front Drag kit for the MK7 platforms. This kit will allow you to run the wheel/tire combo you need to drop your ETs all while putting the car on a significant diet over the stock front brake setup.

The kit is a true plug-and-play setup using VTT parts, coupled with DOT-approved brake lines, CNC rotor hats/brackets, and a CEL eliminator harness for the brake sensor.

MANY MORE AGGRESSIVE BRAKE PAD COMPOUNDS EXIST FROM VARIOUS MANUFACTURERS, AND YOU CAN TAILOR TO YOUR NEEDS.

6-PISTON DYNAPRO PAD STYLE 6712

4-PISTON DYNAPRO PAD STYLE 7812

This kit comes in 1 variation in 2 different caliper sizes

HD Version: Normal street driving, and racing duties

• VTT Custom Cast HD rotors
• Genuine VTT 4-Piston Calipers
• Genuine VTT Brake Pads
• DOT Approved Brake lines
• VTT CNC Rotor Hats
• VTT CNC Brackets
• Brake Sensor CEL ELiminator harness

Weight saving information

VTT Ultimate Dragkit vs OEM Per Side:

• OEM Steel PP kit 42.2lbs per side Total 84.4 lbs
• VTT HD Spec 37 Rotors 14.6 Lbs per side 29.2 Lbs total 55.2 Lbs savings over Stock steel kit

More weight information:

• HD Rotor Spec 37- 9 Lbs
• VTT 4 PistonCaliper 3.6Lbs
• VTT 6 Piston caliper 5.1Lbs
• Rotor Hat 1Lb
• Pads (one side) 1.0 Lbs

Disclaimer: The HD kits are designed for some street use, and drag racing ONLY. Never use for heavy braking racing environments such as Auto-X or Road Racing. Always drive within your limits!

PLEASE NOTE, THAT PADS MUST BE BEDDED PROPERLY TO GET FULL BRAKING FROM THE KIT, IF YOU DO NOT BED THE PADS PROPERLY YOU MAY ONLY GET 30-50% OF THE BRAKING ABILITY. IF YOU GLAZE THE PADS YOU MUST REMOVE THE ROTOR, SAND THEM DOWN, AND THEN REBED. THIS IS VERY IMPORTANT!

Your Brake kit came with a card outlining the proper procedure

Additional Information

Feel free to contact us at info@mlperformance.co.uk should you wish to double check!

To ensure the part(s) you have ordered fits your vehicle, we run a compatibility check prior to dispatch. We can do this either using your registration number (UK) or the last 7 digits of your VIN. Simply enter your car details prior to checkout.

VTT-MQB-BRAKE-1-RED-1 (HD Version (GT36 Rotors) / Red / 4 Piston)

VTT-MQB-BRAKE-1-BLK-1 (HD Version (GT36 Rotors) / Black / 4 Piston)

VTT-MQB-BRAKE-1-SIL-1 (HD Version (GT36 Rotors) / Silver / 4 Piston)

VTT-MQB-BRAKE-1-RED-2-1 (HD Version (GT36 Rotors) / Red / 6 Piston)

VTT-MQB-BRAKE-1-BLK-2-1 (HD Version (GT36 Rotors) / Black / 6 Piston)

VTT-MQB-BRAKE-1-SIL-2-1 (HD Version (GT36 Rotors) / Silver / 6 Piston)

Manufactured by

Vegas Turbocharger Technologies