Have a problematic PCV on your S55/N55 powered BMW, don't want to pay to replace the entire VC? The VTT PCV delete kit is just what you need. This kit blocks the factory PCV from pulling from the head ports, gets rid of the tear-prone rubber diaphragm, and essentially converts your VC into VTA through the factory front port on the VC. This kit can work stand-alone with the cap, and a -10 ORB plug, can be used to run an extra breather port, or it can be installed with any Catch Can kit that uses the front port of the stock VC.

Simply remove the factory cap, take out the diaphragm, screw the plug into the center port, and tap the new cap on with a soft blow hammer or similar. This deletes the PCV and allows you to avoid the issues of a failed diaphragm.

Kit Choices

• Cap and -10ORB plug only (to be used with an existing catch can or VTA)
• Cap and Catch can kit (recirc or VTA) Complete kit to delete the PCV, and run a catch can (Currently works with S55 only)
• Cap Only (To be used if routing an additional hose from the cap to location or set up of choice, requires your parts to work)

Kit Included:

• 1 PCV Cap
• 1 PCV port block off Plug
• 1 -10 ORB Plug
• Optional Catch Can kit

Additional information

Feel free to contact us at info@mlperformance.co.uk should you wish to double check!

To ensure the part(s) you have ordered fits your vehicle, we run a compatibility check prior to dispatch. We can do this either using your registration number (UK) or the last 7 digits of your VIN. Simply enter your car details prior to checkout.

VTT-S55-PCV-CAP-WPLUG (Cap and -10ORB plug only)

VTT-S55-PCV-CAP-CC-RC (Cap with -10 ORB Plug, and Recirc Catch can kit(currently fits S55 only))

VTT-S55-PCV-CAP-CC-VTA (Cap with -10 ORB Plug, and VTA Catch Can Kit(currently fits S55 only))

VTT-S55-PCV-CAP-ONLY (Catch can kit Cap only no plug (to be used as an extra breather port, requires extra parts))

Manufactured by

Vegas Turbocharger Technologies