Installation takes approximately 30 minutes and will require a T30 screwdriver.
Start by opening the bonnet of the car and removing the rubber weather seal from the top of the front bumper. Remove the 6 screws found under the seal with your T30 screwdriver. Pull a section of the bumper above one grille, using a light you should see the first 3 clips, use a long thin flat head screwdriver to depress the clips forward. The grille should now be removed.
Once removed, separate the OEM grille surround from the slats by releasing the clips around the grille. Replace with the carbon fibre article.
Refit the grilles. Complete.